City of Albuquerque - File #: O-11-39

• File #: O-11-39
• Type: Ordinance
• Status: Enacted and Published
• File created: 1/19/2011
• In control: City Council
• Final action: 6/6/2011
• Enactment date: 6/24/2011
• Enactment #: O-2011-017
• Title: Amending The Provision Of Sections 14-16-3-5 (G) ROA 1994, Dealing With Temporary Directional And Identification Signage For New Subdivisions, Changing The Size Requirements For Directional And Identification Signs (Sanchez, Lewis)
• Sponsors: Ken Sanchez, Dan Lewis

Date	Action By	Action	Result
6/24/2011	City Clerk	Published
6/22/2011	Mayor	Signed by the Mayor
6/14/2011	City Council	Sent to Mayor for Signature
6/6/2011	City Council	Do Pass as Amended	Pass
6/6/2011	City Council	Amended	Pass
5/16/2011	City Council	Accepted with a Recommendation Do Pass
5/11/2011	Land Use, Planning, and Zoning Committee	Sent to Council with a recommendation of Do Pass	Pass
1/19/2011	City Council	Introduced and Referred
1/19/2011	President	Referred

CITY of ALBUQUERQUE
NINETEENTH COUNCIL


COUNCIL BILL NO. O-11-39 ENACTMENT NO. ________________________

SPONSORED BY: Ken Sanchez, Dan Lewis


ORDINANCE
t
Amending The Provision Of Sections 14-16-3-5 (G) ROA 1994, Dealing With Temporary Directional And Identification Signage For New Subdivisions, Changing The Size Requirements For Directional And Identification Signs (Sanchez, Lewis)
b
AMENDING THE PROVISIONS OF SECTION 14-16-3-5(G) ROA 1994, DEALING WITH TEMPORARY DIRECTIONAL AND IDENTIFICATION SIGNAGE FOR NEW SUBDIVISIONS, CHANGING THE SIZE REQUIREMENTS FOR DIRECTIONAL AND IDENTIFICATION SIGNS.
BE IT ORDAINED BY THE COUNCIL, THE GOVERNING BODY OF THE CITY OF ALBUQUERQUE:
SECTION 1. Section 14-16-3-5(G) ROA 1994 is amended to read as follows:
“(G) Temporary Directional and Identification Signage for New Subdivisions. Signs that are attached to or part of the structure of a temporary signboard and function only to direct traffic to new residential subdivisions and developments as allowed in § 5-1-3 ROA 1994 and further regulated by this section.
(1) Number. Each signboard shall have a City of Albuquerque header and may have a maximum of four directional and identification signs.
(2) Signboard Size. Each signboard shall not exceed 25 square feet in total area, including header and all signs.
(3) Sign Size. Each individual sign on the signboard shall be at least 9.5 inches tall but no greater than 18 inches tall and shall be 60 inches wide. (Between 576 square inches or 4 square feet and 1080 square inches or 7.5 square feet.)
(4) Header Size. Each signboard shall have a City of Albuquerque header, 15 inches tall by 60 inches wide (900 square inches or 6.25 square feet).
(5) Height. Each signboard shall not exceed 5 feet in height.
(6) Width. Each signboard shall not exceed 5 feet in width.
(7) Construction. Each signboard shall be mounted on 4-inch by 6-inch posts that are designed a...